Remote Control - Modes
LED Indicators On Remote
There are red LEDs underneath each of the four mode keys (STB, TV, DVD, and AUX) that flash each time a key is pressed to show which device the key is currently controlling.
||IP gateway set-top
||TVs (Including HDTVs)
||VCRs, receivers, tuners, and Home Theater in a Box (HTIB)
There are also green LEDs that illuminate several keys whenever the remote is in use. They stay illuminated for a short time after a key is pressed.
During programming, if the remote times out before you complete the code setup, you will need to start over. This is indicated by one long flash of the red LED.